GymGuard® Specs, Colors & Accessories

Brush Assembly

Brush Assembly

Walk behind tape dispenser

Walk behind tape dispenser

Tape dispenser

Tape dispenser

Rack power winder

Rack power winder

Vinyl storage rack cover

Vinyl storage rack cover

System Accessories

Brush Assembly

  • Sweeps each 10' section clean while winding up
  • Easy to attach
  • Durable nylon bristles in steel housing

Tape with hand-held and walk-behind dispensers

  • Secures overlaps and perimeter edges
  • Leaves no residue on floor or cover edges
  • 3" wide x 36 yds. of transparent vinyl per roll

Power winder

Quickly and easily winds up each GymGuard section.
Eliminates hand cranking.

Power winder specifications

  • Motor: Universal 115V
  • Switch: Heavy-duty paddle type with safe lock-off switch,
    separate forward and reverse switch
  • Gear hand: Spur and worm gear reduction drive,
    aluminum housing
  • Body and handle: Durable heavy duty fiberglass-reinforced plastic
  • Spindle speed: 32 RPM (no load)
  • Weight: 12.5 lbs. (5.5 kg) drive only
  • Length: 20" (51 cm)

Vinyl Storage Rack Cover

When not in use, keep cover and rack clean. Dress up the rack to prevent people from leaning and climbing on it.

Free freight on most orders, call for details

Colors & Specifications

GymGuard® Cover Colors

Available GymGuard cover colors

Actual colors may vary.

 

Mobile Rack Specifications

Sizes:
34"W x 12'6"L x 67"H for 10'-wide covers
34"W x 6'4"L x 67"H for 5'-wide covers

Capacity
2,800 lbs. of GymGuard fabric

Rollers
2-1/2" diameter, 14–gauge steel, all with locks
to prevent accidental unwinding

Frame
Mig welded, all-steel construction

Brackets
Steel with Delrin roller bearings

Wheel:
8" non-marking urethane swivel types, all with foot locks

Warranty
20 years against defects in material or workmanship

GymGuard Fabric Specifications and Colors
Rugged Substrates + Durable Coatings = Longer Wear
GymGuard Weight 32 oz. 27 oz. 22 oz. 18 oz. 10 oz.*
Warranty 17 yrs. 15 yrs. 10 yrs. 8 yrs. 3 yrs.
Tear Strength
(Warp x Filling) ASTM D2261		 210 x 210 125 x 90 110 x 75 90 x 65 76 x 76
Tensile Strength
(Warp x Filling) ASTM D5034		 375 x 360 315 x 300 295 x 285 280 x 270 495 x 340
Adhesion
ASTM D751		 35 lbs. 35 lbs. 35 lbs. 35 lbs. N/A
Flame Resistance
(Self-extinguishing Fed Std 191 method #5903)		 PASS PASS PASS PASS PASS

 

Available Stock Colors 32 oz. 27 oz. 22 oz. 18 oz. 10 oz.*
Tan X X X X  
Brown/Tan X X X    
Tan/Royal Blue X X X    
Tan/Burgundy X X      
Royal Blue X X X X  
Navy Blue X X X X  
Burgundy X X X X  
Black X X X X  
Maple Green X X X X  
Red X X X X  
Light Gray     X X X
Dark Gray X X      
Yellow     X X  
Orange       X  
Kelly Green       X  

Please note that these values represent typical data and are subject to slight variations.

*10 oz. cover is reinforced polyethylene fabric